Douglas Connection Bravo OFHC Bi Wire Jumper cables

$89.95$133.95

Base Price is for One set of 4 Bi-Wire Jumpers with Furez TST W series non plated Copper banana plugs on both ends.  Please select the length you want and whether you want silver plated copper or non plated copper connectors.  Then select the connectors you want.

 The Custom Made Douglas Connection Bravo Bi-Wire Jumpers utilize Furez Advanced Series 14 AWG Cable. This Furez 14AWG cable has multiple gauge stranding within a rope lay design of high strand count 99.997% OFHC C10100 Copper with quality foamed polyethylene insulation (FPE). The design yields a clean balanced sound. The Douglas Connection Custom Made Cables use advanced design techniques with high quality materials, which creates a wonderfully detailed sound stage, while controlling inductance, capacitance and magnetic field effects.  These cables are great for your Stereo Audio, or Home Theater system.

 

Douglas Connection Bravo 12AWG Bi Wire Jumper set.
 • Furez 14AWG OFHC Copper 
• 99.997% OFHC C10100 Copper Construction (High Conductivity Oxygen Free Copper)
• 7 Bundle Advanced Rope Lay Design - See Conductor Detail
- 6 Outer Bundles of 99.997% OFC 36AWG Strands x 24
- 1 Core Bundle of 99.997% OFC 27AWG Strands x 3
- Total Strand Count - 147 Per Conductor
• DC Resistance: 2.28 Ohm/1000'
• Rac @ 1KHz: 4.383mOhm/ft
• Capacitance @ 1KHz: 15.43pF/ft
• Inductance @ 1KHz: 0.198uH/ft
• 0.0275" (0.70mm) Foamed Polyethylene (FPE) Insulation
• Nominal Insulated Conductor Diameter - 0.155"

CONSTRUCTION:

The Douglas Connection Bravo Bi-Wire Jumpers are constructed of four 14AWG conductors. Each conductor is made from 147 strands of wire.  Each of the four conductors is formed from seven OFHC 99.997% OFHC C10100 Copper Bundles. The connectors are Silver Plated copper Furez W Ag series connectors.  You can choose banana plugs on both ends, spades on both ends, or a combination.

How they are made:

These cables are totally assembled by hand right here in the USA, by a small family business.  No solder is used in the construction of these jumpers.  Even some of the best solder is made from approximately 61% tin, 35% lead, 3% silver, and 1% copper eutectic. As you can see mostly tin and lead is what these solders contain.  The IACS (International Annealed Copper Standard) chart below shows the conductivity of various metals relative to copper.  Look at Tin and Lead.  Tin is only 15% as conductive as copper, and Lead is a lowly 7% as conductive.  Using tin and lead between the highly conductive speaker wire, and the connector is like putting a flow restrictor on your garden hose that only allows between 7% and 15% of the normal flow.  That’s why we attach the connectors using crimping when we construct your Jumpers.  This allows for the best signal transfer without restricting the flow of music from your amplifier to your speakers.

The IACS (International Annealed Copper Standard) Chart:

Silver 105%

Copper 100%

Gold 70%

Aluminum 61%

Nickel 22 %

Zinc 27%

Brass 28%

Iron 17%

Tin 15%

Phosphor Bronze 15%

Lead 7%

Nickel Alum. Bronze 7%

Steel 3 to 15%

 

 

Additional information

Weight 4 lbs
Dimensions 10 × 10 × 2 in
Bi-Wire Jumper Length

, , , , , , ,

Jumper Connectors Silver Plated Or Non Plated

,

Bi-Wire Jumper connectors

, ,

Brand

Douglas Connection Custom

There are no reviews yet.

Be the first to review “Douglas Connection Bravo OFHC Bi Wire Jumper cables”

Your email address will not be published. Required fields are marked *